AZDOME M300S - Quick Connect Guide

Welcome to the Detail Zone Melbourne Quick Connect Guide for your AZDOME M300S Dashcam.
Follow the steps below to get your dashcam connected and ready to use in just a few minutes.

AZDOME M300S 4K front and 1080p rear dashcam set for dual-channel car video recording

🔌 1. Power Connection

Hardwired Installation (Recommended):

  • The dashcam should already be connected to the vehicle via the Hardwire Kit.
  • Simply locate the quick-connect cable near your rear-view mirror or headliner.
  • Align the connector and push firmly until you hear or feel a click.
  • The dashcam will automatically power on when your ignition is turned on.

Cigarette Socket Connection (Optional):

  • If you’re using the supplied power cable, plug it into your 12V cigarette socket.
  • Connect the USB-C end to your dashcam.
  • The camera will power on when the vehicle is started.

📱 2. Connect to Wi-Fi via the AZDOME App

1. Download the App:
Search “AZDOME” in the App Store (iOS) or Google Play Store (Android) and install it.

2. Turn on the Dashcam Wi-Fi:
Press and hold the Wi-Fi button on the dashcam until the Wi-Fi icon appears on screen.

3. Connect Your Phone:

  • Open your phone’s Wi-Fi settings.
  • Select the network named AZDOME_M300S_XXXX.
  • Enter the password: 12345678 (default).

4. Open the App:

Tap Connect Dashcam.

You can now view live footage, download recordings, and change settings.

💾 3. Memory Card Setup

  • Insert a Class 10 or higher microSD card (up to 128GB).
  • On first use, open the dashcam’s Settings → Format SD Card to ensure compatibility.
  • The camera will automatically loop-record when the card is full.

⚙️ 4. Basic Settings to Check

We recommend checking these key settings in the AZDOME app:

  • Resolution: 2K (default)
  • Loop Recording: 3 minutes
  • Parking Mode: ON (if hardwired)
  • G-Sensor Sensitivity: Medium
  • Date & Time: Ensure correct timezone (Melbourne)

🚗 5. Removing or Reconnecting the Dashcam

  • To remove, press the quick-release button on the mount and slide the dashcam off.
  • To reconnect, simply slide it back until it clicks securely.
  • The dashcam will automatically reconnect to power and resume recording.

💡 Tips

  • Always check the lens is clean and facing forward after re-mounting.
  • Avoid using the dashcam Wi-Fi while driving — connect when parked.
  • For best performance, reformat your SD card once every 2–4 weeks.

❓ Frequently Asked Questions (FAQ)

Q: My dashcam isn’t powering on. What should I do?
A: Check that the quick-connect cable is firmly seated. If using the hardwire kit, confirm it’s connected to a switched fuse.

Q: The app can’t find my dashcam.
A: Ensure the dashcam Wi-Fi is turned on and your phone is connected to the “AZDOME_M300S_XXXX” network. Restart both devices if needed.

Q: How do I view or save footage?
A: Open the AZDOME app → Connect to dashcam → Go to “Album” to view or download files. You can also remove the SD card and insert it into a computer.

Q: Can I leave the dashcam connected all the time?
A: Yes. When hardwired, it’s safe to stay connected. The built-in low-voltage protection prevents battery drain.

Q: My dashcam says “Memory Card Error.”
A: Format the card in the dashcam settings. If the issue continues, try a new Class 10 or U3 microSD card (e.g. Samsung or SanDisk).

📞 Need Help?

If you experience any issues or have installation questions, contact:
📍 Detail Zone Melbourne
📧 info@detailzonemelbourne.com.au
📞 0493 035 197
🌐 www.detailzonemelbourne.com.au